Hip Replacement: The POLARSTEM & R3 Acetabular Cup – A New Design for Better Results

Aug 29, 2019

Richard “Alex” Sweet II, MD

Kate S. Hamilton, PA-C

Richard A. Sweet, M.D. (Retired 2022)

BACKGROUND: A total hip replacement has two components, the acetabular (cup) and the femoral implants (thigh bone and ball). Early attempts at hip replacement were made as far back as 1891 using ivory, and the first hip replacement using metal components was in 1940. These early attempts at hip replacement only replaced the femoral head (ball) and did nothing to the arthritic acetabulum (socket). As biomaterials, technology, surgical techniques, and our understanding of the arthritic process have evolved, total hip replacement surgery has become one of the most successful operative procedures in all of medicine.

INTRODUCTION: During the early evolution of the modern hip replacement, implants were fixed to the bone by using surgical cement. And though this cement fixation worked well over the short term, too many patients experienced implant failure due to early cement loosening. A significant technological breakthrough occurred in the 1980s with the early development of “cement-less” implants. It was found that if implants were coated with a special surface, bone would grow and heal directly to the metal itself without the need for cement fixation. This direct healing of bone to the implant created a much more durable and longer lasting bond. As a result, modern hip replacement designs far outperform and outlast their cemented counterparts of the past. However, longevity is not the only goal of hip replacement surgery. The restoration of natural anatomy is vital to the success of the operation.

 

POLARSTEM Design
RESTORATION OF NATURAL HIP ANATOMY

  • LEG LENGTH: One of the critical aspects of hip replacement surgery is restoring the equal leg length of the pre-arthritic condition. With hip replacement implants all being pre-fabricated, having sufficient modularity and inventory of implant sizes and shapes is crucial to restoring individual anatomy. If anatomy is not restored, the patient may experience unequal leg lengths, a significant limp, weakness, or instability, leading to dissatisfaction with the end result. The POLARSTEM femoral hip implant has the necessary variability of anatomic options to make it an ideal choice for hip replacement.
  • HIP OFFSET: Offset is the distance from the center of the head to the middle of the femur. Restoring anatomic hip offset is critical to hip stability and function. If the offset is too small, the soft tissues are not appropriately tensioned. This can lead to hip instability/dislocations and muscle weakness. Too high of an offset leads to over tightening of the muscles and soft tissues. This can cause bursitis, pain, and poor function. While most implant designs may have one or two offset options, the POLARSTEM has 3, making restoring natural hip anatomy much easier.

BONE INGROWTH: In order for a cement-less hip implant to survive the rigors of daily use, a bond must be created between the implant and the bone. While this used to be accomplished

with cement, we now have the technology to stimulate the native bone to grow into the metal implant, leading to a much more durable construct. The POLARSTEM is a pure titanium stem at its core. Then, small titanium particles are melted to create a plasmic liquid which is sprayed onto the base stem. This “roughens” the smooth metal surface, leaving increased surface area and texture for bony ingrowth. Additionally, the plasma spray is then coated with hydroxyapatite (HA) molecules, a substance well known to stimulate bone growth.

R3 Acetabular Shell
STIKTITE POROUS COATING: The inner core of the R3 Cup is
constructed of pure solid titanium. However, where the titanium contacts
the bone it is covered with a thin layer of highly textured titanium spray,
similar to the POLARSTEM’s plasma spray. This coating is specifically
engineered to maximize bony ingrowth and increase the longevity of the
bond. This highly specialized coating allows the shell to “grip” the bone for
the first 4-6 weeks (through friction) while the bone bonds to the metal.
VERILAST Technology (For Hip & Knee Replacements)
Verilast technology is the strategic development combination of a new type of metal ball that is smoother with
reduced frictional characteristics articulating with a new stronger plastic socket that is much more resistant to
wear. This combination has produced a hip that is much more durable than past
implants.

REDUCED WEAR: As the hip joint moves and bears the weight of the body, the
metallic ball rubs against and into the plastic liner of the cup. Over time, this
friction causes wear of the plastic that can cause the hip to fail. The perfect hip
replacement would be made of a material that allows for frictionless and wear-free
motion. While no such material exists, the Oxinium (zirconium) femoral head has
the lowest frictional properties of any material on the market.

  • XLPE POLYETHYLENE: Unlike plastic that you may find around your house or work, the plastic polyethylene
    used in knee and hip replacement surgery must be specially treated to ensure longevity and safety.
    The goal has been to develop a plastic that is both smooth (low friction) and durable. It must stand up to
    the rigors of daily constant usage. The XLPE (highly-crosslinked polyethylene) is manufactured under
    specific conditions to make it stronger and smoother than any plastic ever developed.
  • OXINIUM FEMORAL HEAD: If the plastic is smooth and durable, then the metal head that articulates
    with it must also be smooth and durable. Most surgeons use a cobalt chrome head on their plastic liners.
    However, metal heads have small imperfections in the form of bumps and cracks in their surface that over
    time wears down the plastic liner like sandpaper. Oxinium is a “ceramicized” metal. The result of the
    manufacturing process is a material (Oxinium) that is both significantly harder and smoother than any
    metal currently used in knee and hip replacements.
  • ALLERGY FREE: An added benefit of the Oxinium ball is that it is nickel free, as are the
    titanium femoral and cup implants of the Polarstem / R3 THR implant system. Nickel, the
    most common allergy inducing biomaterial used in joint replacement surgery, is present in all cobalt
    chrome implants commonly used in other implant systems. Thus, the titanium of the Polarstem and R3 cup combined with the Oxinium of the femoral ball are all biologically inert, making the entire construct completely safe even in patients with metal allergy concerns.
What our patients are saying
Shaun H.
I was able to get a office visit on short notice. It seemed to be a very busy day. Rebecca took the time to listen to all of my issues and discuss a plan for additional treatment. I have always been impressed with her knowledge and bed side manner.
Reviews from Google
Joanna S.
Dr Goodin has replaced both of my knees this year with excellent results. He and Carly listen to my concerns, act promptly and work hard to make this journey the best it can be. Carly and Dr Goodin both have GREAT bedside manner and I feel I am in expert care with them.
Reviews from Facebook
Sara G.
Dr. Richardson is the best! He did shoulder decompression surgery for me many moons ago and has continued to treat me for other shoulder, arm, and back issues since. I would recommend him to anyone!
Reviews from Facebook
Juanita S.
The New Albany office of Louisville Orthopedic is full of terrific people who know what excellent customer service is about! From the front desk to the lab, they are great. Doctor Lewis is my surgeon and I love him. He’s good at what he does and he’s compassionate. I would recommend him to anyone.
Reviews from Facebook
Erin Z.
This was my first time at Louisville Orthopaedic Clinic and I saw Melissa Parshall PA-C. I was very impressed with how fast I got in, had x-rays, and met with her. She was very thorough and extremely friendly. So glad A friend told me to come see you guys! Thank you!
Reviews from Facebook
See All Reviews
Louisville Orthopaedic Clinic

4130 Dutchman's Lane,
Suite 300,Louisville 40207
(502) 897-1794

Louisville Orthopaedic Clinic

1425 State St.,
,New Albany 47150
(812) 920-0408

Locations
*MAIN LOCATION
Louisville Orthopaedic Clinic
4130 Dutchman's Lane
Suite 300
Louisville, KY 40207

Louisville Orthopaedic Clinic
1425 State St.
New Albany, IN 47150